| 5 categories in Conveyors |
 |
Purpose: Allow operators to rotate and move objects sideways while on the conveyor line, reducing reaches
Ergonomic guidelines: Should place material between 38" and 49" above the standing surface and not greater than 16" horizontally from the edge of the conveyor
Photo source: Ashland Conveyor
North America
Ashland Conveyor
Motion Savers, Inc.
Omtec Corporation
Europe
Norcan
Asia
Logistics Asia Pacific |
 |
Purpose: Custom designed to meet specific challenges
Ergonomic guidelines: Should place material between 38" and 49" above the standing surface and not greater than 16" horizontally from the edge of the conveyor
Photo source: QC Industries, Inc.
North America
New London Engineering
Newland Conveyors
QC Industries, Inc.
Europe
Norcan |
 | |
 |
Purpose: Enable operators to sit while working at the conveyor without experiencing mechanical stress on the thighs and poor seated postures
Ergonomic guidelines: Should place material between 27" and 36" above the standing surface
Photo source: QC Industries, Inc.
North America
Dorner Mfg. Corp.
QC Industries, Inc.
Shuttleworth
|
 |
Purpose: Reduce exposure to high forces and reaching when pushing/pulling products on a conveyor
Ergonomic guidelines: Should place material between 38" and 49" above the standing surface and not greater than 16" horizontally from the edge of the conveyor
Photo source: Itoh Denki USA, Inc.
North America
Itoh Denki USA, Inc.
Material Flow & Conveyor Systems, Inc.
Grainger
|